Rhubarb's Redux Kits
Redux Custom
The complete 3D-printable insert kit compatible with the Lian Li O11 Vision Compact, fitted to your build and delivered as STL files.
$35.00
Purchase FilesDigital files only. No physical parts are shipped.
After purchase, you'll send us three photos of your build. If we need any measurements, we'll ask by email.
How it works
- Choose Redux Custom and check out.
- Send us three photos of your build (side, top and front) and any specific requests.
- We confirm your build is compatible. If it isn't, you get a full refund.
- We fit the insert kit to your hardware.
- Receive your fitted files.
- Print.
- Included: one refinement pass to refine the fit of your build as photographed, within 30 days of delivery.
Overview
Redux Custom is the complete Redux Insert Kit compatible with the Lian Li O11 Vision Compact: 3D-printable STL files, fitted to your build. It's one full-coverage insert kit in place of separate shrouds, covers and grommets. It's fully customizable and integrates with almost every component, so the insert kit is shaped around your hardware instead of the other way round.
Included: one refinement pass to refine the fit of your build as photographed, within 30 days of delivery.
Refinement Pass: any changes after that, including new or swapped components, any time while we offer the insert kit.
What's included
STL files for every part of the insert kit, adjusted to fit your build. They open in any slicer.
A sheet of our recommended print settings.
Compatibility
Case: Lian Li O11 Vision Compact.
Motherboard: most ATX motherboards. Standard and BTF (back-connect) boards both work.
Fans: 120 mm fans.
Cooling: air-cooled and water-cooled systems.
Lian Li 8.8" Universal Screen: integrated as standard, but not required. If your build doesn't have the screen, we remove its pocket.
Glass panels: the top and side glass must be installed. The insert kit is held in place by the case frame and the glass, so without them it isn't secure.
GPU support: your stock anti-sag bracket works, but we recommend letting us build GPU support into the insert kit, included at no extra charge. Just tell us you'd like it, and we'll ask for any measurements we need.
Other components: fully customizable, so the insert kit works with almost all components.
Printer: every part fits a 256 × 256 × 256 mm build volume, like the Bambu Lab X1 Carbon, P1S, P1P and A1.
Before your files are sent
Every order starts with a conversation. Before we send any files, we check that your build is compatible. All we need are three photos of your build: the side (through the large glass panel), the top (through the top glass panel) and the front (through the small glass panel). If we need any measurements after that, we'll ask you by email.
If we find your build isn't compatible, you get a full refund and no files are sent.
Supported materials
Polymaker ASA (recommended): the best choice for the heat inside a running PC. Print it in an enclosed printer with good ventilation.
Polymaker PETG: what our own insert kit is printed in. It holds up well and is easier to print than ASA.
Not recommended: PLA and HS PLA, which soften with the heat inside a running PC.
Buying Polymaker filament? Use code REDUXKITS at polymaker.com.
Referral disclosure: we may earn a small commission when you use our code. It doesn't change our recommendations.
Questions
Is there a 3D-printed cover for the Lian Li O11 Vision Compact?
Yes. Redux is a complete 3D-printable insert kit compatible with the O11 Vision Compact, delivered as STL files and fitted to your build from photos you send us.
Is this an official Lian Li product?
No. Rhubarb's Redux Kits is an independent project, not affiliated with or endorsed by Lian Li. The insert kit is our own design, made to be compatible with the O11 Vision Compact.
What do I get?
STL files for every part of the insert kit, adjusted to your build, plus a sheet of our recommended print settings. They open in any slicer.
Will it fit my motherboard?
Most ATX motherboards work. Standard and BTF (back-connect) boards are both supported.
Does it work with the Lian Li 8.8" Universal Screen?
Yes, the screen is integrated as standard. If your build doesn't have one, we remove its pocket.
What 3D printer do I need?
Every part fits a 256 × 256 × 256 mm build volume, like the Bambu Lab X1 Carbon, P1S, P1P and A1.
What filament should I use?
ASA is the best choice for the heat inside a running PC. PETG works well too, and it's what our own insert kit is printed in. We don't recommend PLA.
Do I need to measure my build?
No. Just send us three photos of your build: the side, the top and the front. If we need any measurements, we'll ask you by email.
What if my build isn't compatible?
We check every build from your photos before sending any files. If yours isn't compatible, you get a full refund and no files are sent.